Now showing items 1-7 of 7

    • Qin, J.; Wang, S. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2004)
      A site survey on a modern operating commercial building screened 261 ineffective VAV (Variable Air Volume) boxes (20.9% of the total boxes in the building) and summarized ten typical faults for VAV air-conditioning system(s) ...
    • Meenakshi Sundaram, Vivek (2012-07-16)
      With the widespread use of doubly-fed induction generators (DFIG) in wind energy conversion systems, condition monitoring is being given importance. Non-intrusive techniques like motor current signature analysis (MCSA), ...
    • Cui, J.; Wang, S. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2004)
      This paper presents strategies for detecting and diagnosing the chiller component faults and the sensor faults involved in chiller conditioning monitoring and control. The two strategies are used in series. One strategy diagnoses ...
    • Akin, Bilal (2009-05-15)
      Electric motors are used widely in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation ...
    • Pan, S.; Zheng, M.; Nakahara, N. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)
      The authors simulated the human ability of pattern recognition mathematically, through finding the state-change characteristics of the objective system from actual measurements using statistical analytical tech-niques. The ...
    • Zhou, Y.; Zheng, J.; Liu, Z.; Yang, C.; Peng, P. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)
      At first the basic research about FDD is summarized, and a detection model based on ANN is initially set up. The paper presents experiments that simulate seven faults, including change flow rate of chilled water, cooling ...
    • Choi, Seungdeog (2012-02-14)
      The main types of faults studied in the literature are commonly categorized as electrical faults and mechanical faults. In addition to well known faults, the performance of a diagnostic algorithm and its operational ...